Texas Instruments

LM25141 Synchronous Buck Controllers

Texas Instruments offers the LM25141 synchronous buck controllers in a QFN-24 package

Image of Texas Instruments' LM25141 Synchronous Buck ControllersTexas instruments' LM25141 is a synchronous buck controller, intended for high voltage wide VIN step-down converter applications. The control method is peak current mode control. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting, and ease of loop compensation. The LM25141 features slew rate control to simplify the compliance with EMI requirements.

The LM25141 has two selectable switching frequencies: 2.2 MHz and 440 kHz and gate drivers with slew rate control that can be adjusted to reduce EMI.

In light or no-load conditions, the LM25141 operates in skip cycle mode for improved low power efficiency. The LM25141 has a high voltage bias regulator with automatic switch-over to an external bias to reduce the IQ current from VIN. Additional features include frequency synchronization, cycle-by-cycle current limit, hiccup mode fault protection for sustained overload, and power good output.

Features
  • -40ºC to +125ºC ambient operating temperature range
  • An AEC-Q100 qualified device is available
  • VIN 3.8 V to 45 V (47 V absolute max)
  • Output: fixed 3.3 V, 5 V, or adjustable from 1.5 V to 15 V with ±0.8% accuracy
  • Fixed 2.2 MHz or 440 kHz switching frequency with ±5% accuracy
  • High-side and low-side gate drive with slew rate control
  • Optional frequency shift by varying an analog voltage or RT resistor
  • Optional synchronization to an external clock
  • Optional spread spectrum
  • Shutdown mode IQ: 10 µA (typ)
  • Low standby mode IQ: 35 µA (typ) 
  • 75 mV current limit threshold with ±0.9% accuracy
  • External resistor or DCR current sensing
  • Output enable logic input
  • Hiccup mode for sustained overload
  • Power good indication output
  • Selectable diode emulation or forced pulse width modulation
  • QFN-24 package with wettable flanks
Applications
  • Medical equipment
  • Industrial programmable logic controllers
  • Industrial PCs
  • Embedded PCs

LM25141 Synchronous Buck Controllers

ImageManufacturer Part NumberDescriptionAvailable QuantityPriceView Details
LOW VOLTAGE LM5141- SYNC BUCK COLM25141RGETLOW VOLTAGE LM5141- SYNC BUCK CO633 - Immediate$503.68View Details
LOW VOLTAGE LM5141- SYNC BUCK COLM25141QRGETQ1LOW VOLTAGE LM5141- SYNC BUCK CO5088 - Immediate$624.95View Details
AUTOMOTIVE, 2.2MHZ, LOW IQ SYNCHLM25141QRGERQ1AUTOMOTIVE, 2.2MHZ, LOW IQ SYNCH8768 - Immediate$370.90View Details
Published: 2017-06-06

Related Product Highlight

LM5145 75 V Synchronous Buck Controller Texas Instruments offers the LM5145 75 V synchronous buck controller with an operational input voltage range from 6 V to 75 V.
DRV832x 60 V Three-Phase Smart Gate Drivers Texas Instruments' DRV832x family of devices are integrated 6 V to 60 V gate drivers for three-phase motor drive applications.
LM5141 Synchronous Buck Controllers Texas Instruments' LM5141 is a synchronous buck controller used to convert a higher input voltage to a lower output voltage.

Related Articles and Blogs

Optimal Power Management Techniques in Energy Harvesting Designs Battery size constraints in energy harvesting systems necessitate creativity and innovation in order to maximize efficiency of the power source.